Mitsubishi 6M70 - Injector

13-10
1.3 Mitsubishi 6M70 Injector
• In ac
cordance with electrical signals from the engine electronic control unit, each injector supplies high-pressure
fuel from the common rail to the relevant combustion chamber of the engine at the optimal timing and in the opti-
mal quantity.
• The Mitsubishi 6M70 injector is divided into the control section and the injector section.
• The control section consists of the control chamber, magnet, valve spring, armature plate, valve ball, valve
body, valve piston, orifice A, and orifice Z. The valve piston is located between the control section and the injec-
tion section.
• The injection section consists of the nozzle body, nozzle needle, nozzle spring, and nozzle nut.
STRUCTURE AND OPERATION
Mits
ubishi 6M70 Engine Parts contact:
email: EngineParts@HeavyEquipmentRestorationParts.com
Phone: 269 673 1638