Mitsubishi 6M70 - Inspection of Belts

14-8
2. Inspection of Belts
• Visually check the belt for a crack or damage.
• If there is any abnormality, replace the belt.
Belt condition Remaining service life (reference)
• The driving distance over the
which the belt can still be used is
at least as long as that over which
the belt has been used since the
vehicle was new or since the belt
was replaced (whichever is more
recent).
• The driving distance over the
which the belt can still be used is
about half of that over which the
belt has been used since the vehi-
cle was new or since the belt was
replaced (whichever is more re-
cent).
• The driving distance over the
which the belt can still be used is
about a quarter of that over which
the belt has been used since the
vehicle was new or since the belt
was replaced (whichever is more
recent).
• The belt has reached the end of
its service life and must be re-
placed.
ON-VEHICLE INSPECTION AND ADJUSTMENT