13-76
Disassembly sequence
1 Cap
2 Fuel return pipe
3 Overflow valve
4 Fuel feed pipe
5 Eyebolt
6 Fuel feed pipe
7 Plug
8 Drain plug
9 O-ring
10 Case
11 Float
12 O-ring
13 Element
14 Fuel filter head
: Non-reusable parts
Assembly sequence
Follow the disassembly sequence in re-
verse.
WARNING
• Fuel is highly flammable. Keep it
away from flames and sources of
heat.
• Thoroughly wipe up any spilled fu-
el. Otherwise, it may catch fire.
CAUTION
• Be careful not to damage the case.
Service standards
Tightening torque (Unit: N·m {kgf·m})
Lubricant and/or sealant
Location Maintenance item Standard value Limit Remedy
3 Overflow valve
1.14 ± 0.03 MPa
{12 ± 0.3 kgf/cm
2
}
–Replace
Mark Parts to be tightened Tightening torque Remarks
Eyebolt 30 {3.0} –
Drain plug 2 ± 0.5 {0.2 ± 0.05} –
Case 18 to 20 {1.8 to 2.0} –
Plug 9.8 ± 2.0 {1.0 ± 0.2} –
Overflow valve
20 to 29 {2.0 to 3.0} –
Cap
Mark Points of application Specified lubricant and/or sealant Quantity
O-ring Engine oil As required
FUEL FILTER
To Next Page
Loading...
