11-90
Lubricant and/or sealant
Special tools (Unit: mm)
Inspection before disassembly
Inspection: Crankshaft end play
• If the measurement exceeds the specified limit, replace the
oversized thrust plates.
Oversizes available: 0.15, 0.30, 0.45 mm
• Replace the crankshaft if the end play cannot be adjusted within
the standard range.
Mark Points of application Specified lubricant and/or sealant Quantity
Front oil seal lip
Engine oil As requiredThread of bolts
Inside surface of main bearing
Mark Tool name and shape Part No. Application
Socket wrench MH063365 Installation of main bearing cap
MH061817 Installation of front oil seal slinger
MH061652 Installation of ring
Gear puller MH061061 Removal of crankshaft gear
Front oil seal slinger
installer
A
φ 108
Rear oil seal slinger in-
staller
A
φ 123
CRANKSHAFT AND CRANKCASE
M
itsubishi 6M70 Engine Parts contact:
email: EngineParts@HeavyEquipmentRestorationParts.com
Phone: 269 673 1638
To Next Page
Loading...
