15-44
Cartridge Assembly
Disassembly sequence
Assembly sequence
Follow the disassembly sequence in reverse.
Service standards (Unit: mm)
Location Maintenance item Standard value Limit Remedy
11
Shaft and turbine
wheel
Turbine housing-to-shaft and tur-
bine wheel clearance
0.39 to 1.0 – Replace
Bearing journal outside diameter – 11.996 Replace
Shaft bend – 0.015 Replace
14 Bearing
Outside diameter – 20.382 Replace
Inside diameter – 12.042 Replace
Length – 11.94 Replace
17
Inside diameter of bearing insertion bore in bearing
housing
– 20.506 Replace
1 Lock nut
2 Compressor wheel
3 Snap ring
4 Insert
5 Piston ring
6 Thrust sleeve
7 Oil deflector
8 Thrust ring
9 Thrust bearing
10 Thrust ring
11 Shaft and turbine wheel
12 Piston ring
13 Turbine back plate
14 Bearing
15 Snap ring
16 O-ring
17 Bearing housing
: Non-reusable parts
MITSUBISHI 6M70 TURBOCHARGER PARTS
Mitsubis
hi 6M70 Engine Parts contact:
email: EngineParts@HeavyEquipmentRestorationParts.com
Phone: 269 673 1638
To Next Page
Loading...
