12
12-17
Installation procedure
Installation: Oil pan
• Clean the mating surfaces of each part.
• Apply a bead of sealant to the mating surface of the oil pan
evenly and without any breaks.
Change the amount of application to A and B at four locations
shown in the illustration.
• Mount the oil pan within three minutes of applying the sealant.
Make sure that the sealant stays in place.
CAUTION
• Do not start the engine less than an hour after installation. If
the oil pan mounting bolts were loosened or removed, be
sure to reapply sealant.
To Next Page
Loading...
