13
13-71
Lubricant and/or sealant
Special tools (Unit: mm)
Removal procedure
•
Removal: Mitsubishi 6M70 Injection pipe
Apply (width across flats
: 15 mm) to the connector of the
injector as a stopper, and then loosen the union nut to remove
the injection pipe.
CAUTION
• Do not use except for a stopper of the injection pipe,
otherwise the open end section may be broken.
Mark Points of application Specified lubricant and/or sealant Quantity
O-ring Engine oil As required
Mark Tool name and shape Part No. Application
ME165088
Removing injector
(use with MH061071)
MH061071 Removing injector
ME355665
Removal and installation of injection
pipe
Injector extractor
adapter
Nozzle extractor
A
M8 × 1.25
Open end spanner
AB
15 24
Mitsubishi 6M70 Engine Parts contact:
email: EngineParts@HeavyEquipmentRestorationParts.com
P
hone: 269 673 1638
To Next Page
Loading...
