14
14-13
Tightening torque (Unit: N·m {kgf·m})
Installation procedure
Installation: Outlet hose
• Install the outlet hose so that its marking faces the stopper of the
water pipe.
Installation: Hose
• Install the hose marked with a white line so that this white line is
placed in the center of the clamp.
Mark Parts to be tightened Tightening torque Remarks
Hose clamp 4.0 ± 0.5 {0.4 ± 0.05} –
Hose clamp 5.0 ± 0.5 {0.5 ± 0.05} –
Hose clamp 3.5 to 4.5 {0.35 to 0.45} –
Hose clamp 4.4 {0.45} –
Hose clamp 6.5 ± 0.5 {0.7 ± 0.05} –
To Next Page
Loading...
