14
14-17
Special tools (Unit: mm)
Installation procedure
Installation: Thrust rod
• Tighten nuts so that the thickness of cushion rubbers on both
ends of the thrust rod is to the dimension shown in the illustra-
tion.
Installation: Fan shroud
• Using , adjust the clearance between the fan shroud and
cooling fan blades to the dimension shown in the illustration over
the entire circumference.
Installation: Shroud seal and fan shroud
• Install the shroud seal and fan shroud while aligning the section
A as shown in the illustration.
Mark Tool name and shape Part No. Application
ME294842
Adjusting clearance between fan
shroud and cooling fan blades
Tip clearance
spacer
AB
50 7
To Next Page
Loading...
