11-36
Installation procedure
Installation: Camshaft gear
• Heat the camshaft gear to approximately 150°C using a gas
burner.
• While facing the camshaft gear as shown in the illustration,
press it onto the camshaft until it seats snugly on the camshaft.
WARNING
• You may burn yourself if you touch the heated camshaft
gear.
CAUTION
• When installing the camshaft gear, be sure to apply the load
with the press at the center of the gear. Apply the load on
the gear may damage the gear.
CAMSHAFT AND ROCKER CASE
To Next Page
Loading...
