11
11-55
Special tools (Unit: mm)
Work before removal
Retaining of cylinder liners
• The cylinder liners may move up when the crankcase is turned
over, or the crankshaft is rotated after the pistons are installed.
To prevent this, retain the cylinder liners by holding their flanges
with bolts and washers.
Mark Tool name and shape Part No. Application
Piston guide clamp MH061667
Installation of piston and connecting
rod
Piston guide lever MH061658
Socket wrench MH061560
MH062194 Removal of cylinder liner
Adapter ME350054
Measurement of cylinder liner flange
protrusion and step height between
adjacent cylinder liners
Bolt MF130651
Washer MF450009
Cylinder liner extractor
A
φ134.5
AB
40 M16
× 2
To Next Page
Loading...
