Input/output setting mode
Serial
No.
Function Specifications
53 CDE
When the down counter count value reaches [0], the count down complete output
signal (CDE) will turn ON.
54 DTS
When the sewing machine is stopped due to thread breakage detection, the
stopped due to needle thread breakage detection output signal (DTS) will turn ON.
55 --1
Use prohibited.
56 DRT
The sewing machine rotating output signal (DRT) will turn ON while the sewing
machine is rotating.
57 DN
The DOWN position output signal (DN) will turn ON when the DOWN position signal
is input from the detector.
58 CB
This is the buzzer output signal for notifying that a sewing machine error or
message has occurred.
59 UP
The UP position output signal (UP) will turn ON when the UP position signal is input
from the detector.
60 PWR
This is the power ON output signal.
[15]-9
To Next Page
Loading...
