Reading, writing and erasing data (floppy disk)
[5]-2
(2) Writing (to floppy disk)
Memo The sewing data of 224 patterns can be written in the maximum. (The
number of patterns which can be written according to the content of the
data. )
Operation points
* Select Write from the menu.
* Change the target to the floppy disk.
* Set the pattern name and number, and start writing.
Operation details
1. Selecting data write
* Press on the Standard screen,
and open the Menu mode.
* Press
2. Setting the pattern name and number
* In the same manner as when reading
data, the default mode when the
screen is opened is the internal
memory mode. Change to the floppy
disk mode. (Refer to steps 2 and 3 for
reading data.)
* Set the pattern name and number.
(The default pattern name and number
are set.)
To change the pattern name,
press , and to change
the number press .
Highlight the key, and then change the
setting.
*When the key is pressed,
one of the alphanumeric characters
from the right can be deleted from the
pattern name or number.
To Next Page
Loading...
Need help?
General
