List of keys
Input mode
PATTERN DATA CLEARED B DATA IS MADE (NORMAL INPUT) CANCELS(RETURN
(NEW INPUT) ONE PREVIOUS STATE)
PATTERN DATA NOT BA DATA IS MADE ERASE STITCH TO INPUT
CLEARED (CONTINUE) (MANY INPUT POINT) POINT BEFORE
FEED DATA INPUT SEWING INPUT (WITH OUT FEED) STRAIGHT LINE INPUT
ARC INPUT CIRCLE INPUT CURVE INPUT
BROKEN LINE INPUT POINT INPUT DELIMITATION POINT OF
CURVE INPUT
MACHINE SPEED IS MADE MACHINE SPEED IS MADE
HIGH SPEED MEDIUM1
MACHINE SPEED IS MADE MACHINE SPEED IS MADE INPUTS LENGTH OF SEWING
MEDIUM2 HIGH SPEED STITCHES
CODE DATA IS INPUT SEWING MACHINE SPEED MULTIPLE SEWING (FEED)
OR MODIFY IS CHANGED
REVERSE MULTIPLE (FEED) MULTIPLE SEWING (SEWING) REVERSE MULTIPLE
(SEWING)
OFFSET INPUT IS DONE DETAILS OF MULTIPLE/ OFFSET DETAILS OF ZIGZAG SEWING
IS SET IS SET
ZIGZAG SEWING DETAILS OF BACK TACKING BACK TACKING SEWING
SEWING IS SET
MULTIPLE BACK TACKING DATA IS MADE AT THE RIGHT DATA IS MADE AT THE LEFT
STITCH
ZIGZAG DATA IS MADE ZIGZAG DATA IS MADE ZIGZAG DATA IS MADE
AT THE RIGHT AT THE CENTER AT THE LEFT
OFFSET DATA IS MADE OFFSET DATA IS MADE V BACK TACKING
AT THE RIGHT AT THE LEFT
N BACK TACKING W BACK TACKING M BACK TACKING
1 STITCH MULTIPLE 2 STITCH MULTIPLE 3 STITCH MULTIPLE
BACK TACKING BACK TACKING BACK TACKING
4 STITCH MULTIPLE BACK TACKING IS NOT SET MULTIPLE･OFFSET SEWING
BACK TACKING IS NOT SET
ZIGZAG IS NOT SET END CODE DATA IS INPUT MADE RETURN DATA
(FEED TO HOME)
SKIP JOG THE SKIP JOG IS VALID THE SKIP JOG IS INVALID
MOVES IN THE STRAIGHT LINE FOLLOWING THE TRACKS
AND MOVES
[Appendix]-2
To Next Page
Loading...
Need help?
General
