9 - 27
9.3 Program Examples for Use in MELSECNET/H Remote I/O Network
9.3.1 Automatic communication parameters
9
PROGRAMMING
* 1 Set the MELSECNET/H link refresh by refresh parameters in the network parameters.
( This section (3) (b))
* 2 Set the MELSECNET/H link scan by the network range assignment in the network parameters.
( This section (3) (b))
* 3 By the auto refresh setting of GX Configurator-MB, transfer the automatic communication function
buffer area data to the MELSECNET/H remote I/O module. ( This section (3) (d))
* 4 Automatic communication parameters are set from GX Configurator-MB.
( This section (3) (c))
To Next Page
Loading...
