Sec 2: 8-12 Disassembly/Reassembly Procedures: Radio Disassembly
8.7.2 Removal of the Speaker Module (B)
1. Remove the top two screws (23) as shown in Figure 8-14.
Figure 8-14. Remove Top Screws
2. Carefully pick out the Speaker Module (18) with the Black Stick and swing it out of the
Main Chassis Assembly (K) as shown in Figure 8-15.
Figure 8-15. Remove Speaker Module
Be careful not to damage the speaker cone or the Port Seal (20)
during the disassembly process.
This Module has lubricant on the seal and can be contaminated
with foreign material. Any foreign material can put the radio's
submergibility at risk.
Top Screws (23)
Port Seal (20)
Speaker Cone
Speaker Cone
Port Seal (20)
To Next Page
Loading...
