EasyManuals Logo

Motorola APX 7000 Basic Service Manual

Motorola APX 7000
292 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #86 background imageLoading...
Page #86 background image
Sec 1: 7-2 Encryption: Select an Encryption Key
7.3 Select an Encryption Key
You can select an encryption key using either the menu or the keypad.
7.3.1 Use the Menu
To select an encryption key using the menu:
1. Press
> until the display shows “KEY”.
2. Press
{, |, or } directly below “KEY”. The display shows the last user-selected and
-stored encryption key, as well as the available menu selections.
3. Press
< or > to scroll through the list of encryption keys.
NOTE: If you select an erased key, the display alternates between showing the encryption
key and “ERASED KEY”.
4. Press
{, |, or } directly below the desired menu.
PSET = selects the preset or default encryption key.
SEL = saves the newly selected key and returns to the home display.
5. Press
H, the PTT button, or {, |, or } directly below the ABRT menu, or turn the
16-Position Select knob to exit this menu.
If the selected key is erased, the display shows “KEY FAIL” and the radio sounds a
momentary keyfail tone.
If the selected key is not allowed, the display shows “ILLEGAL KEY” and the radio sounds a
momentary illegal key tone.
7.3.2 Use the Keypad
To select an encryption key using the keypad:
1. Press
> until the display shows “KEY”.
2. Press
{, |, or }directly below “KEY”. The display shows the last user-selected and
stored encryption key, as well as the available menu selections.
3. Using the keypad, enter the number of the desired key.
NOTE: If you select an erased key, the display alternates between showing the encryption
key and “ERASED KEY”.
4. Press
< or > to select from the menu.
PSET = selects the preset or default encryption key.
SEL = saves the newly selected key and returns to the home display.
5. Press
H, the PTT button, or {, |, or } directly below the ABRT menu, or turn the
16-Position Select knob to exit this menu.
If the selected key is erased, the display shows “KEY FAIL” and the radio sounds a
momentary keyfail tone.
If the selected key is not allowed, the display shows “ILLEGAL KEY” and the radio sounds a
momentary illegal key tone.

Table of Contents

Other manuals for Motorola APX 7000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Motorola APX 7000 and is the answer not in the manual?

Motorola APX 7000 Specifications

General IconGeneral
Digital TechnologyP25 Phase 1 and Phase 2
Emergency ButtonYes
Frequency Range136-174 MHz (VHF), 380-470 MHz (UHF Range 1), 450-520 MHz (UHF Range 2), 764-870 MHz (700/800 MHz)
DisplayColor LCD
EncryptionAES, DES
Water ResistanceIP67
GPSYes
BluetoothYes
Operating Temperature-30°C to +60°C
Weight391 g (with standard battery)

Related product manuals