Motorola APX 7000 - Advanced Features; Saving a Channel in the Dynamic Zone from List Selection; Saving a Channel in the Dynamic Zone from Channel Name

Radio Alignment Procedures: Transmitter Alignments Sec 1: 6-19
Figure 6-27. Transmit Deviation Balance Alignment Screen (UHF2 and VHF)
9. Left-click the PTT Tone: High button.
10. Adjust the softpot value until the measured deviation/voltage, when using the high tone, is
within +/- 1.5% of the value observed when using the Low Tone.
11. Left-click the PTT Toggle to de-key the radio.
12. Repeat the steps 4 to 10 for all frequencies.
13. Left-click the Program All button on the screen to dekey the radio and save the tuned values.