CHAPTER 6 USB INTERFACE
Introduction
This chapter describes how to set up the digital scanner with a USB host. The digital scanner connects directly
to a USB host, or a powered USB hub, which powers it. No additional power supply is required.
Throughout the programming bar code menus, asterisks (
*) indicate default values.
*Disable Simulated Caps Lock
Feature/Option
*Indicates Default
NOTE Most computer monitors allow scanning the bar codes directly on the screen. When scanning from the
screen, be sure to set the document magnification to a level where you can see the bar code clearly, and
bars and/or spaces are not merging.
To Next Page
Loading...
