User Preferences & Miscellaneous Options 4 - 29
PDF Prioritization
Parameter # 719
Enable this feature to delay decoding a 1D bar code (Code 128 of 8 to 25 characters length) by the value
specified in PDF Prioritization Timeout. During that time the digital scanner attempts to decode a PDF417
symbol (e.g., on a US driver's license), and if successful reports this only. If it does not decode (can not find) a
PDF417 symbol, it reports the 1D symbol after the timeout. The 1D symbol must be in the device’s field of view
for the digital scanner to report it. This parameter does not affect decoding other symbologies.
PDF Prioritization Timeout
Parameter # 720
When PDF Prioritization is enabled, this timeout specifies how long the digital scanner attempts to decode a
PDF417 symbol before reporting the 1D bar code in the field of view.
Scan the following bar code, then scan four digits from Appendix G, Numeric Bar Codes that specify the
timeout in milliseconds. For example, to enter 400 ms, scan the following bar code, then scan 0400. The range
is 0 to 5000 ms, and the default is 200 ms.
NOTE Disable Picklist Mode on page 4-23 if enabling this parameter.
*Disable PDF Prioritization
(0)
Enable PDF Prioritization
(1)
PDF Prioritization Timeout
To Next Page
Loading...
