Motorola DS9208 - Continuous Bar Code Read; Unique Bar Code Reporting

4 - 24 DS9208 Product Reference Guide
Continuous Bar Code Read
Parameter # 649
Enable this to report every bar code while the trigger is pressed.
Unique Bar Code Reporting
Parameter # 723
Enable this to report only unique bar codes while the trigger is pressed. This option only applies when
Continuous Bar Code Read is enabled.
NOTE Zebra strongly recommends enabling Picklist Mode with this feature. Disabling Picklist Mode can cause
accidental decodes when more than one bar code is in the imaging engine's field of view.
*Disable Continuous Bar Code Read
(0)
Enable Continuous Bar Code Read
(1)
*Disable Continuous Bar Code Read Uniqueness
(0)
Enable Continuous Bar Code Read Uniqueness
(1)