Motorola DS9208 - Aztec; Aztec Inverse

10 - 90 DS9208 Product Reference Guide
Aztec
Parameter # 574
To enable or disable Aztec, scan the appropriate bar code below.
Aztec Inverse
Parameter # 589
This parameter sets the Aztec inverse decoder setting. Options are:
• Regular Only - the digital scanner decodes regular Aztec bar codes only.
• Inverse Only - the digital scanner decodes inverse Aztec bar codes only.
• Inverse Autodetect - the digital scanner decodes both regular and inverse Aztec bar codes.
*Enable Aztec
(1)
Disable Aztec
(0)
Regular
(0)
Inverse Only
(1)
*Inverse Autodetect
(2)