10 - 46 DS9208 Product Reference Guide
Set Lengths for Code 11
Parameter # L1 = 28, L2 = 29
The length of a code refers to the number of characters (i.e., human readable characters), including check
digit(s) the code contains. Set lengths for Code 11 to any length, one or two discrete lengths, or lengths within
a specific range. The default option is Length Within Range, 4 to 55.
•
One Discrete Length - Decode only Code 11 symbols containing a selected length. Select the length
using the bar codes in Appendix G, Numeric Bar Codes. For example, to decode only Code 11 symbols
with 14 characters, scan Code 11 - One Discrete Length, and then scan 1, 4. To correct an error or to
change the selection, scan Cancel on page G-2.
•
Two Discrete Lengths - Decode only Code 11 symbols containing either of two lengths. Select
lengths using the bar codes in Appendix G, Numeric Bar Codes. For example, to decode only Code 11
symbols containing either 2 or 14 characters, select Code 11 - Two Discrete Lengths, and then scan
0, 2, 1, 4. To correct an error or to change the selection, scan Cancel on page G-2.
•
Length Within Range - Decode Code 11 symbols with a specific length range. Select lengths using
bar codes in Appendix G, Numeric Bar Codes. For example, to decode Code 11 symbols containing
between 4 and 12 characters, first scan Code 11 - Length Within Range, and then scan 0, 4, 1, 2. To
correct an error or change the selection, scan Cancel on page G-2.
•
Any Length - Decode Code 11 symbols containing any number of characters within the digital scanner’s
capability.
NOTE When setting lengths, enter a leading zero for single digit numbers.
Code 11 - One Discrete Length
Code 11 - Two Discrete Lengths
*Code 11 - Length Within Range
(Default: 4 to 55)
Code 11 - Any Length
To Next Page
Loading...
