Motorola DS9208 - Presentation Aiming Pattern

User Preferences & Miscellaneous Options 4 - 15
Presentation Aiming Pattern
Parameter # 590
Select Enable Presentation Aiming Pattern to project the aiming pattern during bar code capture in
presentation mode, Disable Presentation Aiming Pattern to turn the aiming pattern off, or Enable
Presentation Aiming Pattern on PDF to project the aiming pattern when the digital scanner detects a 2D bar
code.
This parameter does not apply to Snapshot Mode. See Operational Modes on page 5-4.
NOTE With Picklist Mode on page 4-23 enabled, the decode aiming pattern flashes even when the Decode
Aiming Pattern is disabled.
Enable Presentation Aiming Pattern
(1)
*Disable Presentation Aiming Pattern
(0)
Enable Presentation Aiming Pattern on PDF
(2)