User Preferences & Miscellaneous Options 4 - 13
Trigger Mode
Parameter # 138
Select one of the following trigger modes for the digital scanner:
•
Standard (Level) - A trigger pull activates decode processing. Decode processing continues until the bar
code decodes, you release the trigger, or the Decode Session Timeout occurs.
•
Presentation - The digital scanner activates decode processing when it detects a bar code in its field of
view. After a period of non-use, the digital scanner enters a low power mode, in which the LEDs turn off
until the digital scanner senses motion.
•
Auto Aim - This trigger mode turns on the LED aiming dot when you lift the digital scanner. A trigger pull
activates decode processing. After 2 seconds of inactivity the aiming dot shuts off.
Standard (Level)
(0)
*Presentation
(7)
Auto Aim
(9)
To Next Page
Loading...
