User Preferences & Miscellaneous Options 4 - 23
Picklist Mode
Parameter # 402
Picklist mode enables the digital scanner to decode only the bar code targeted by the aiming dot. Select one of
the following picklist modes for the digital scanner:
•
Disabled - Picklist mode is always disabled.
•
Enabled in Trigger Mode - Picklist mode is enabled when the digital scanner is out of trigger mode and
disabled when the digital scanner is in presentation mode.
•
Enabled Always - Picklist mode is always enabled.
NOTE Picklist mode functions optimally when bar codes are vertically spaced a minimum of 15 mm edge to edge.
Disabled
(0)
*Enabled in Trigger Mode
(1)
Enabled Always
(2)
To Next Page
Loading...
