Motorola DS9208 - Page 343

Standard Default Parameters A - 7
Code 39
Code 39
0 Enable 10-34
Trioptic Code 39
13 Disable 10-34
Convert Code 39 to Code 32
(Italian Pharmacy Code)
86 Disable 10-35
Code 32 Prefix
231 Disable 10-35
Set Length(s) for Code 39
18, 19 Length Within Range: 2 to 55 10-36
Code 39 Check Digit Verification
48 Disable 10-37
Transmit Code 39 Check Digit
43 Disable 10-37
Code 39 Full ASCII Conversion
17 Disable 10-38
Code 39 Security Level 750 Security Level 1 10-39
Code 39 Reduced Quiet Zone 1209 Disable 10-40
Code 39 Buffering 113 Disable 10-41
Clear Buffer N/A N/A 10-42
Transmit Buffer N/A N/A 10-42
Code 93
Code 93
9 Disable 10-43
Set Length(s) for Code 93
26, 27 Length Within Range: 4 to 55 10-44
Code 11
Code 11
10 Disable 10-45
Set Lengths for Code 11
28, 29 Length Within Range: 4 to 55 10-46
Code 11 Check Digit Verification
52 Disable 10-47
Transmit Code 11 Check Digit(s)
47 Disable 10-48
Interleaved 2 of 5 (ITF)
Interleaved 2 of 5 (ITF)
6 Enable 10-49
Set Lengths for I 2 of 5
22, 23 Length within Range: 6 - 55 10-49
I 2 of 5 Check Digit Verification
49 Disable 10-51
Transmit I 2 of 5 Check Digit
44 Disable 10-51
Convert I 2 of 5 to EAN 13
82 Disable 10-52
Table A-1 Standard Default Parameters Table (Continued)
Parameter
Parameter
Number
Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.