MSENSE
®
DGA 9 7045899/02 EN – 11.2020 Page 12
• All protocol interfaces (Modbus, DNP3 and IEC 61850) have read-only access to the
MSENSE® DGA 9. A change of parameters or data is not possible.
• Access to the parameterisation via the MSET parameterisation software can be protected by
passwords. Change the passwords on a regular basis.
Observe the notes on access authorisations, user levels and password settings in the operating in-
structions for the MSET parameterisation software.
To Next Page
Loading...
