MR MSENSE DGA 9 - Transformer-Related Settings; DGA Adjustment

MSENSE
®
DGA 9 7045899/02 EN – 11.2020 Page 94
Alarm settings (6.10.3)
MSENSE
®
DGA settings (6.10.4)
Exit settings menu
6.10.1 Transformer-related settings
Transformer-specific information can only be entered and managed using the MSET DGA programme.
However, this information is not absolutely necessary in order to operate the device.
The following sub-menus can be selected in the “Transformer-related settings” menu:
DGA adjustment (6.10.1.1)
Exit settings menu
6.10.1.1 DGA adjustment
In the menu “DGA adjustment”, results from laboratory analyses can be entered. These can then be
used to calculate correction factors, which are then applied to determine the gas content.