MSENSE
®
DGA 9 7045899/02 EN – 11.2020 Page 92
6.8.1 Alarm acknowledegement
Password entry is required to acknowledge the selected alarm (standard password 123456).
After entering the corresponding password using the alphanumeric keyboard and confirming with the
enter key, the alarm is acknowledged.
Remark: Every alarm must be acknowledged individually in the firmware.
6.8.2 Alarm settings of the selected alarm
In the sub-menu “Alarm settings” the detailed information of the selected alarm is displayed.
Details regarding the corresponding alarm settings can be found in chapter (6.10.3).
To Next Page
Loading...
