4
Mounting and installation
Connecting the camera to the terminal
20 30302710-02-EN V7.20141016
Connection to the terminal
Camera
Cable for connection to the voltage supply.
GND (blue) - Earth
+12V (brown) - 12V voltage
Camera plug
Socket for connection to the camera plug
1. Screw the camera together with its bracket, as described in the assembly instructions of the
camera manufacturer.
2. Connect the camera to the cable harness.
3. CAUTION! When laying out the cable harness, you should ensure that no kinks form in
the cable, and that no one can trip over the laid-out cable.
4. Connect the junction of the cable harness to a power source (12V). Müller-Elektronik offers
different plugs for this purpose, which you can connect to the cable.
5. Connect the cable harness to the camera connection of the terminal.
6. Secure the camera.
7. Activate the camera. [➙ 39]
To Next Page
Loading...
Need help?
General
