Muller Elektronik TRACK Guide II User Manual

Configuring the terminal in the Service application
GPS receiver
7
30302710-02-EN V7.20141016 33
1. Switch to the "Display settings" screen:
| Service | Display settings
⇨ The following screen will appear:
2.
- Change the desired parameter.
Parameter
Sub-parameter
Meaning
Brightness
Day
Adjusting brightness for day mode
Night
Adjusting brightness for night mode
Night mode Switching night mode on and off
0 = day mode is activated
1 = night mode is activated
Volume
Adjust volume
Date / time
Date
Setting current date
Time
Setting current time
Time zone 0 = Time zone: Greenwich Mean Time (GMT)
1 = GMT +1 hour (Germany)
-1 = GMT -1 hour
Language
Selecting language
Measurement units
Metric
Displays all units in metrical system
Imperial Displays all units in imperial system
US
Displays all units in US system
Keyboard brightness Setting the level of keyboard brightness in percent
GPS receiver
When you connect a GPS receiver to the terminal, you must activate and configure it.
Procedure
List of parameters
7.5

Muller Elektronik TRACK Guide II Specifications

General

Brand	Muller Elektronik
Model	TRACK Guide II
Category	Touch terminals
Language	English