Configuring the terminal in the Service application
Icons in the Service application
7
30302710-02-EN V7.20141016 31
Delete file (red) Selected object can be deleted
Configure GPS receiver GPS receiver is activated
Configuring farmpilot farmpilot portal is activated
Open the Diagnostics screen Diagnostics is activated
Retrieve default values.
Display DGPS connection status
Associating the buttons on a joystick with
functions
Driver "Auxiliary2" is activated
Icons in the Service application
You will find the following icons in the Service application.
Function is activated
Function is deactivated
Changing the language
When you switch on the terminal for the first time, the text may appear in a foreign language (in
German).
If you change the language in the Service application, you also change the language for all
applications and the ISOBUS job computer.
If a connected ISOBUS job computer cannot activate the selected language, a standard language will
be activated.
1. - Switch on the terminal.
2.
- Press.
To Next Page
Loading...
Need help?
General
