Muller Elektronik TRACK Guide II User Manual

Contents
30302710-02-EN V7.20141016 3
Contents
1
For your safety
6
1.1
Basic safety instructions
6
1.2
Layout and meaning of warnings
6
1.3
User requirements
7
1.4
Intended use
7
1.5
EC declaration of conformity
7
2
About these Operating Instructions
8
2.1
Target group of these Operating Instructions
8
2.2
Layout of operating instructions
8
2.3
Layout of references
8
3
Product description
9
3.1
Performance description
9
3.2
Scope of delivery
10
3.3
Information on the nameplate
10
4
Mounting and installation
11
4.1
Mounting the terminal in the tractor cab
11
4.1.1 Terminal ports 12
4.1.2
Mounting the GSM antenna
12
4.2
Connecting the terminal to voltage supply
13
4.3
Connecting the terminal to the ISOBUS
13
4.4
SIM card
14
4.4.1
Inserting the SIM card
14
4.5
Connecting the ISO printer to the terminal
15
4.6
Connecting the ME LightBar to the terminal
16
4.7
Connecting the on-board computer to the terminal
16
4.8
Connecting the GPS Receiver to the terminal
17
4.9
Connecting sensors to the terminal
18
4.10
Connecting the camera to the terminal
19
5
Basic control principles
21
5.1
Getting to grips with the controls
21
5.2
Initial start-up
22
5.3
Configuration sequence
23
5.4
Using the function keys
23
5.5
Restarting the terminal
24
5.6
Inputting data
25
5.7
Using two terminals
25

Muller Elektronik TRACK Guide II Specifications

General

Brand	Muller Elektronik
Model	TRACK Guide II
Category	Touch terminals
Language	English