MUTOH ValueCut VC2-1300 - Backup of Settings

MAINTENANCE MANUAL
VC2E-MM-00
37
Backup of Settings
Make the backup of "AAS Offset X/Y" and "Scale Length/Width".
When updating the firmware, all setting except these values will be initialized.
In Offline mode, Press TOOL SELECT key to enter the tool setting menu.
Click the right arrow key twice to display the restore menu.
Press CUT TEST key and ON/OFF LINE key at the same time.
Press ENTER key.
x2
Tips for pressing both buttons at the same time：
Press the CUT TEST key first, and then press the
ON/OFF Line key.
1
2