MUTOH ValueCut VC2-1300 - Media Drops Sometimes

MAINTENANCE MANUAL
VC2E-MM-00
59
Media drops sometimes.
[Check item] [Action]
 Is the media loaded askew? Reload the media.
 Is the pinch roller set on the top of drum? Move the pinch roller to a right position.
 Is the edge of media damaged? Change the media.
 Is the media cut straight across? Cut the media evenly and reload the media.
 Is the media too thin? Change the media.
 Is the drum or pinch roller worn? Replace the drum set or pinch roller.