MUTOH XPJ-461UF - Page 64

64 Set1: User Type
Effect
Selects the effect.
Set up this menu when you want to improve print quality by adjusting the set
print mode.
Setting values
The Effect function is not applied.
The printing joint will shade off.
This is the default setting.
**>2: Adjust Print>
Adjusts the printer to optimize the print quality for the media.
• Required media size: width 210 mm × length 100 mm.

"Confirm pattern" P. 82
"Rough adjustment pattern" P. 66
"Fine adjustment pattern" P. 66
Submenus
Print a confirm pattern.
Print rough adjustment patterns A to C
and enter adjustment values.
Print rough adjustment pattern A only
and enter an adjustment value.
Print rough adjustment pattern B only and
enter an adjustment value.
Print rough adjustment pattern C only
and enter an adjustment value.
Print fine adjustment patterns A to C and
enter adjustment values.
Print fine adjustment pattern A only and
enter an adjustment value.
Print fine adjustment pattern B only and
enter an adjustment value.
Print fine adjustment pattern C only and
enter an adjustment value.
＊＊：Mode:  Fast
7201080 12pass Uni
**:Effect:
None
**:Effect:
  i-WeaveUV
Type**:2
AdjustPrint
**:AdjustPrint1
  ConfirmPattern
**:AdjustPrint2
  RoughPatternALL
**:AdjustPrint3
  RoughPatternA
**:AdjustPrint4
  RoughPatternB
**:AdjustPrint5
  RoughPatternC
**:AdjustPrint6
  FinePatternALL
**:AdjustPrint7
  FinePatternA
**:AdjustPrint8
  FinePatternB
**:AdjustPrint9
  FinePatternC