MUTOH XPJ-461UF - Page 75

Set2: Advanced 75
Layer Multi Strike
Layer Multi Strike1: Color Layer
Layer Multi Strike2: White Layer
Advanced Settings 1: Multi Strike
Sets the number of times to print the same line.
• The display will shift to setting of layer printing number of strikes only when
“Strike Cnt” is set to 1 in 6-color configuration.
Setting values
<1 times> to 9 times
<> indicates the default setting.
The display will shift to layer selection.
Submenus
Layer Multi Strike1: Color Layer
Layer Multi Strike2: White Layer
Layer Multi Strike3: Varnish Layer
Sets the number of times to print the same line in color (CMYK) layer.
Setting values
<1 times> to 9 times
<> indicates the default setting.
Sets the number of times to print the same line in white layer.
Setting values
<1 times> to 9 times
<> indicates the default setting.
AdvancedSetting1
MultiStrike
MultiStrike：
(1-9)   1cnt
MultiStrike：
(1-9)   1cnt
LayerMultiStrike1
ColorLayer
LayerMultiStrike2：
WhiteLayer
LayerMultiStrike3：
VarnishLayer
LayerMultiStrike1
ColorLayer
ColorLayer：
(1-9)   1cnt
LayerMultiStrike2：
WhiteLayer
WhiteLayer：
(1-9)   1cnt