Messages and Error Messages 159
During discharge Flushing ink from the print head in the head cleaning process.
Please wait a while.
User: Type ** OK? Initializing the media.
Please wait a while.
(** represents the set User type.)
Media Initial
Move To
Origin Position
The print head is moving to the print start position to check the print origin
Please wait a while.
Confirm Position
End -> Enter
The print head has moved to the print start position. If it shows the intended
position, tap (Enter).
Power Off Turning OFF the printer. Wait for a while.
Insert InkCartridges Charging the ink. Insert high-capacity ink pack adapters.
Insert CleaningCart. Washing Print head. Install cleaning bags.
Remove Cartridges Washing Print head or discharging ink.
Remove high-capacity ink pack adapters.
S/C Reading Reading the S/C card.
*** Remote Mode ***
End -> Enter
The remote panel mode is running, via MSM or similar. In the remote panel
mode, operations via the front panel are not possible. To terminate the
remote panel mode, press the (Enter) key for more than two seconds.
Roll Remain Error The remaining roll paper count has become 0. (Printing stops)
Roll Near End: *m The remaining roll paper count is almost 0. The remaining roll paper is *m.
Color: * color Choose the ink configuration you want to use.
Life Times [Pump] The operational life of the pump motor has almost expired.
(Continues operation)
Contact your local MUTOH dealer.
Life Times [CR Motor] The operation life CR motor has almost expired.
(Continues operation)
Contact your local MUTOH dealer.
Life Times [PF Motor] The operational life of the PF motor has almost expired.
(Continues operation)
Contact your local MUTOH dealer.
Life Times [C Pump] The operational life of Circulation pump motor is almost expired.
(Continues operation)
Contact your local MUTOH dealer.
Nozzle Check F
Start -> Enter
The printer has been in sleep mode for one week. Press the [Enter] key to
return the printer to Normal operation. Agitate ink cartridges (ink bags), and
then perform Nozzle Check.
[*] Change Plug
OK -> Enter
Connector rubber for High-capacity ink pack adapter is at the end of its life.
Replace Connector rubber of High-capacity ink pack adapter.
"Replacing Adapter’s plug" P. 142
Ink Circulation Ink is circulating inside the printer.
Shake W Cartridge Agitate the White (Wh) ink.
Display Description
To Next Page
Loading...
