142 Replacing consumable parts
Replacing period:
• When “[*******] Change Plug” is displayed on the Operation panel.
Preparation
• Plastic gloves, glasses, mask
• Cleaning stick
• Paper towel or Soft cloth
• Adapter’s plug
• Fine-tipped tool (such as precision screwdrivers)
• High-capacity ink pack adapter sealing jig
When the plug life ends, the status LED turns on red and a message is displayed.
Follow the procedure below to replace the plug.
Replacing Adapter’s plug
Wear protective equipment (gloves, goggles or eye protection, protective mask, protective clothing) when
handling ink.
Be cautious that ink does not get into your eye or make a contact with your skin.
When ink gets into your eye or make a contact with your skin, wash with water immediately. If left as it is,
it may cause red eye or light inflammation. If it is necessary, please see your doctor immediately.
Important!
Using the printer without replacing adapter’s plug can cause ink leakage.
Note
• [*******] on the message indicates the ink slot number that the adapter's plug of the installed high-capacity ink pack adapter needs to be replaced.
• If you do not have a spare adapter's plug, keep the high-capacity ink pack adapter inserted in the printer, but replace the plug as soon as possible.
Leaving the printer without high-capacity ink pack adapter can clog the Head.
• When the included adapter’s plugs have run out, contact your local MUTOH dealer.
[1]
Tap [Enter].
[2]
The message on the left will appear.
[8]ChangePlug
OK ー＞ Enter
To Next Page
Loading...
