Agitating ink 115
3 Agitating ink
Agitate the ink at the following times to prevent it from settling out and/or coagulating:
• Before installing new ink
• When any of the messages below appears
Agitating ink
Agitate the White (Wh) ink.
• Displays every 12 hours.
Important!
• Agitate the ink periodically.
Otherwise, the ink settles or coagulates and may cause poor print quality or a malfunction.
• You should agitate the ink when the message appears. Otherwise, for 12 hours after the message appears, you will repeatedly
have to wait a certain time before you can print.
When 12 hours have passed, the printer will not print any data. In either case, you can restore the printer to normal condition by
agitating the ink.
Wear protective equipment (gloves, goggles or eye protection, protective mask, protective clothing) when
handling ink.
Be cautious that ink does not get into your eye or make a contact with your skin.
When ink gets into your eye or make a contact with your skin, wash with water immediately. If left as it is,
it may cause red eye or light inflammation. If it is necessary, please see your doctor immediately.
ShakeWCartridge
To Next Page
Loading...
