Powering ON / OFF 21
1 Powering ON / OFF
Turning the power ON
[1]
Close the front cover.
[2]
Long press the Power button.
• The Power LED (above the Power button) lights up.
• The printer will start mechanical initialization.
Note
Once the Power LED lights up, release the Power button.
Turning the power OFF
Important!
Use the printer with its power turned permanently on. When you are not using the printer, always leave the power on and put the
printer into the sleep mode while not in use. If you do not put the printer into the sleep mode, the ink inside the printer could settle
out and/or coagulate, causing poor image quality or printer failure.
"Sleep Mode 2: Start" P. 102
[1]
Make sure printing is done.
[2]
Long press the Power button.
• The printer will start powering off.
[3]
When the message on the left appears, release the Power button.
•The Power LED lights off.
To Next Page
Loading...
