20 Introduction
This product requires regular user maintenance.
• Run a nozzle check before and after printing.
If nozzle missing is found, run a head cleaning.
• Clean the cleaning wiper and around the print head once a week.
• If you are not using the printer for an extended period*, run a head cleaning once a week.
If you may not be able to perform weekly head cleaning, perform [Longstore] (
"Long-term storage" P. 150).
*"Extended period" means one to four weeks.
• Clean inside of your printer once a month.
• Regularly check the waste ink tank and empty the tank as needed.
In this product, there are some parts required to be replaced after a long-term use.
• User replaceable parts: Absorption material for the flushing box, Cutter, Cleaning wiper
• Parts required to be replaced by service personnel: Motors, Pumps, Print heads
Conduct periodic maintenance
Some parts need to be replaced periodically
To Next Page
Loading...
