Muton XPJ-1682D - Setup 15: Auto Cleaning

Menu 1: Setup 83
Setup 15: Auto Cleaning
Configure the settings for the auto cleaning operation.
Submenus
Standby Mode menu
While Printing menu
Before Print menu
Standby Mode menu
The display goes to the Cleaning Interval setting to set the timer for auto
cleaning while in standby mode.
The cleaning type is fixed to "Little Charge".
Setting values
<Off> / 10 min to 1,440 min
<> indicates the initial value.
While Printing menu
The display goes to the Cleaning Interval setting to set the timer for auto
cleaning while in printing.
The cleaning type is fixed to "Little Charge".
Setting values
<Off> / 5 min to 180 min
<> indicates the initial value.
Before Print menu
Choose the auto cleaning mode to be performed before printing.
Setting values
<Off> / Short / Normal / Long
<> indicates the initial value.
Setup 15
Auto Cleaning
Auto Cleaning 1
Standby Mode
Auto Cleaning 2
While Printing
Auto Cleaning 3
Before Print
Auto Cleaning 1
Standby Mode
Cleaning Interval:
Off
Auto Cleaning 2
While Printing
Cleaning Interval:
Off
Auto Cleaning 3
Before Print
Before Print:
Off