Muton XPJ-1682D - Setup 29: Alert Buzzer; Setup 30: Internal LED Lights; Setup 31: Front Interlace

Menu 1: Setup 91
Setup 29: Alert Buzzer
Selects how to turn off the printer beep sound when an error occurs.
For unattended printing, you can select “Off” setting to avoid continuous buzzer
beep.
Setting values
Press any key on the front panel to turn off
beep sound.
This is the initially set value.
After several beeps, the printer
automatically turns off beep sound.
Setup 30: Internal LED Lights
Selects the internal LED lights settings.
The lights help to inspect inside of the printer or your print during printing.
Submenus
The LED lights automatically turn on while
printing, front cover open, initializing media,
cutting media, specifying print start position
(origin), and feeding media.
The default is set to Auto.
The LED lights are always on. It will turn off
while in sleep mode or when the printer is
powered off.
The LED lights are disabled.
Setup 31: Front Interlace
Select to enable or disable the Front Interlace function.
It automatically fine tunes the media feeding amount of the first print swath to
improve print quality.
Use the “Auto” setting for normal print job.
In following cases, try with “Off” setting to see if the print quality is improved:
• If the print defect due to nozzle missing is found on the first print swath of the print.
• If the print quality is clearly different between the first print swath and rest of the area
on the print.
Submenus
Automatically enable the Front Interlace
function as needed.
The default is set to "Auto".
Disable the Front Interlace function.
Setup 29
Alert Buzzer
Alert Buzzer:
On
Alert Buzzer:
Off
Setup 30
LED Light
LEDLight:
   Auto
LEDLight:
   On
LEDLight:
   Off
Setup 31
Front Interlace
Front Interlace:
Auto
Front Interlace:
Off