78 Menu 1: Setup
When the “Output Mode” is set to “Take Up”
When the “Output Mode” is set to “Off” or “Auto Cut”
When the “Output Mode” is set to “Take up”, the menu is shifted to “Page Gap”.
In the “Page Gap menu”, you can change the margin setting between images.
Setting values
The default margin setting between
images will be applied.
This is the initially set value.
The margin setting between images is
smaller than Normal.
After setting the Page Gap, sets the Ink drying time.
Use or to enter the value, and tap (Enter).
Setting values
<0 sec> to 60 min
<> indicates the initial value.
Sets the ink drying time.
Use or to enter the value, and tap (Enter).
Setting values
<0 sec> to 60 min
<> indicates the initial value.
InkDryTimer:
(0 sec - 60 min) 0 sec
Output Mode:
Off
Output Mode:
Auto Cut
InkDryTimer:
(0 sec - 60 min) 0 sec
To Next Page
