Myray hyperion X9 - Assembly Instructions; Removal of Packaging

3
EN
hyperion - TECHNICAL MANUAL
0. Assembly instructions
InstallationoftheX-rayunitmustbedonebyqualiedtechniciansinaccordancewiththemechanicalandelectrical
assemblyinstructionsdenedasfollows.Checkthatthevoltageindicatedonthesysteminfoplatecorrespondstothat
of the electrical system.
0.0 Removal of packaging
The device must be transported packaged as far as the characteristics of the building will allow. Remove the cardboard
packaging outside the area/room where the device will be installed.