Myray hyperion X9 - Error Messages Generated from the Keyboard

167
EN
hyperion - TECHNICAL MANUAL
Cod. Meaning Description/solution
CALIB 104 Move column failed
Verify column | Verify connection | Restart device | re-
start the application
CALIB 105 Stop column failed
Wait and retry | Verify column | Verify connection | Re-
start device | restart the application
CALIB 106 Exit calib mode failed
Wait and retry | Verify connection | Restart device | re-
start the application
CALIB 107
Auto shot interrupted (only in tubehead cali-
bration and runin)
Verify connection | Verify interlock | Reset axes | Restart
device | restart the application
CALIB 108 Refresh image info failed
Wait and retry | Verify data | verify connection | Restart
device | restart the application
CALIB 109 Move chinrest failed
Wait and retry | Verify connection | Verify chinrest | Re-
start device | restart the application
CALIB 110 Standby failed
Wait and retry | Verify connection | Restart device | re-
start the application
4.2.5 Error messages generated from the keyboard
Cod. Meaning Description/solution
3.1
KEYBOARD - Incomaptibile version: please
update the rmware
3.2 Please wait, system update in progress...