Native Instruments Absynth 5 - Spectrum Edit

ABSYNTH 5 Reference Manual – 108
• FM…: Frequency modulation; the current waveform serves as carrier. This dialog allows
you to change the following features:
▪ WaveformSelector: select a modulator waveform from the Waveform Selector (light
blue button).
▪ ModulatorFrequencycontrol: denes the frequency ratio between modulator and carrier.
▪ ModulationIndexcontrol: determines the FM’s intensity.
▪ CarrierFrequencycontrol: denes the carrier’s frequency ratio.
▪ ModPhasecontrol: regulates the modulator’s phase.
▪ Load…: loads a waveform and replaces the existing waveform.
▪ Importfromaudiole…: loads the rst 1024 samples from an AIFF- or WAV le as
a waveform.
▪ LoadTemplate…: retrieves a saved waveform from ABSYNTH’s Universal Library.
▪ SaveasTemplate…: saves a waveform in ABSYNTH’s Universal Library.
▪ Clear: produces silence.
7.4 Spectrum Edit
The Spectrum page of the Wave Window displays the edited waveforms’ rst 64 harmonics.
The top half of the display shows the harmonics’ amplitude, the lower half their phase. At
the bottom of the window you can see – depending on the mouse position – the harmonic’s