Native Instruments Absynth 5 User Manual

ABSYNTH 5 Reference Manual – 89
%
LFO modulation in opposite directions of the output positions deliver interesting Panning
effects. If the two points intersect, the sound characteristics become mono.
6.2.1 Parameters
Master Section
• Beatswitch: With the Beat switch you select whether the value in Master Length control
should be indicated in seconds (Sec) or in beats (Beat), ie in quarter Master Length con-
trol: Determines the virtual string’s maximum length. In terms of application this means:
that’s where the maximal delay can be set.
• MasterSensitivitycontrol: Denes the Macro Control’s impact on the value of the Master
Length’s parameter.
• Inversionswitch: If you turn on the Inversion switch, the effect of the control signal re-
ceived via the Macro Control is inverted (see the section on Modulation und Sensitivity
control).
• MasterFeedbackcontrol: Determines the level of the feedback signal in percentage of
the original level; at higher values, the virtual string resonates longer, at lower values it
is silenced faster.
• Lowpasscontrol: Denes the cutoff-frequency of the Lowpass lter, through which the
feedback signal passes (in Hz). It changes the string’s sustain characteristic.
Pipe Section
• InputPosition: denes the position for the element that animates the virtual string to vi-
brate.
• OutputPositionsL/R: dene the positions for the two pickups L and R.
• Sensitivitycontrol: Determines the impact of the control signal received via the Macro
Control on the value of the Output Position controls, i.e. the position of the pickups.

Native Instruments Absynth 5 Specifications

General

Brand	Native Instruments
Model	Absynth 5
Category	Synthesizer
Language	English